• Two - 10,000 lb. spring axles with electric brakes
• Eight 235-85 R16 10 ply radials on 16" dual rims
• One two speed jack rated at 25,000 lbs.
• 2-5/16" gooseneck coupler
• Stake pockets and blind chains
• ICC DOT standard light and reflector kit - all lights are mounted in shock proof rubber grommets
• Five colors of PPG Industrial Coating to choose from
• Front gravel guarded
• 1600 PSI 1.5 Gallon per minute hydraulic pump and reservoir with 12 volt battery pack and remote
• Handles and ladders at front of bed on both sides.

    AVAILABLE OPTIONS

• 12,000 or 15,000 lb. axles
• 9' x 8'-6" platform on neck
• 2" kingpin
• Inverted fifth wheel plate
• Spare tire and rim
• Tandem two speed jacks
• Air brake options with auto slack, 30:30 chambers and 1 or 2 axle ABS
• 9,000 lb. electric winch with fair leads and 50' of 3/8" cable
• Winch plate
• Demco Glider Coupler™
• Tool Boxes

	Winches Winches are offered as an option - this 9000 lb electric winch will pull 25,000 lbs of rolling stock up the tail.
	Hydraulic Pump Remote Electric over hydraulic pump and reservoir with a remote located at the hinge point.
	Neck Platforms Neck platforms are offered as an option - this 9' x 8'-6" platform really helps for extra supplies and hauling area.
Also available as a tag with a pintle hook.

	Maurer Hydraulic Tail Trailers are chemically washed then fully primed and painted with a PPG Industrial Coating before being floored.
	Choose from a variety of colors.
Maurer Trailers are equipped with exclusively new components.  Maurer Manufacturing has never cut corners and never will!  Buy a Maurer...Remember, you're also buying resale value!  STANDARD FEATURES & AVAILABLE OPTIONS TRAILER SPECIFICATIONS If you have a specific question about these trailers, contact Maurer Mfg. at: maurer@maurermfg.com